Overview

Project website salsa.debian.org/installer-team/installation-guide
Instructions for translators

https://d-i.debian.org/doc/installation-guide/ Mailing list for translators: <debian-boot@lists.debian.org
Project maintainers User avatar hwansing
Translation license GNU General Public License v2.0 or later
Translation process
  • Translations can be made directly.
  • Translation suggestions can be made.
  • Any authenticated user can contribute.
  • The translation uses bilingual files.
Source code repository https://salsa.debian.org/installer-team/installation-guide.git
Repository branch master
Last remote commit [SILENT_COMMIT] Update of POT and PO files for the installation-guide 37bd1922e
D-I role authored 3 days ago
Last commit in Weblate Translated using Weblate (Swedish) f15bec6ed
User avatar yeager74 authored yesterday
Weblate repository https://hosted.weblate.org/git/debian-installation-guide/bookinfo/
File mask po/*/preseed.po
Translation file Download po/vi/preseed.po
Last change Jan. 20, 2025, 7:14 a.m.
Last change made by None
Language Vietnamese
Language code vi
Text direction Left to right
Case sensitivity Case-sensitive
Number of speakers 92,312,588
Number of plurals 1
Plural type None
Plurals
Plural formula 0
2 days ago

String statistics

Strings percent Hosted strings Words percent Hosted words Characters percent Hosted characters
Total 235 8,253 59,458
Translated 78% 184 58% 4,803 57% 34,251
Needs editing 9% 23 34% 2,874 34% 20,654
Read-only 0% 0 0% 0 0% 0
Failing checks 5% 12 6% 573 7% 4,181
Strings with suggestions 0% 0 0% 0 0% 0
Untranslated strings 11% 28 6% 576 7% 4,553
Last 12 months Previous

Activity in last 12 months

1 change 0 changes 11 changes 2 changes 6 changes 3 changes 2 changes 0 changes 1 change 0 changes 1 change 0 changes 1 change 3 changes 0 changes 1 change 3 changes 0 changes 1 change 6 changes 7 changes 1 change 7 changes 5 changes
JanFebMarAprMayJunJulAugSepOctNovDec

Quick numbers

8,253
Hosted words
235
Hosted strings
78%
Translated
0
Contributors
and previous 30 days

Trends of last 30 days

+1%
Hosted words
+100%
+1%
Hosted strings
+100%
−1%
Translated
+78%
—
Contributors
—
User avatar None

Resource updated
The “po/vi/preseed.po” file was changed. 10 days ago
User avatar None

String added in the repository
When an Automatic install is selected without also specifying a preseed configuration, the user will be prompted to provide a preseed location. Alternatively, if a preseed configuration has been specified, then that prompt is normally suppressed in order to enable a fully non-interactive install. However, if the intent is to modify defaults by using a <literal>preseed.cfg</literal> in an initrd, then the result should really behave as though no preseeding has yet been specified, even though it has. In that case, the debconf variable <literal>auto-install/cloak_initrd_preseed</literal> can be set to <literal>true</literal> (e.g. in the initrd's <literal>preseed.cfg</literal>). to get the required behaviour.
 
10 days ago
User avatar None

Resource updated
Parsing of the “po/vi/preseed.po” file was enforced. 3 weeks ago
User avatar None

Resource updated
Parsing of the “po/vi/preseed.po” file was enforced. a month ago
User avatar None

Resource updated
The “po/vi/preseed.po” file was changed. a month ago
User avatar None

String added in the repository
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/sda
# and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm: use LVM to partition the disk
# - crypto: use LVM within an encrypted partition
d-i partman-auto/method string lvm

# You can define the amount of space that will be used for the LVM volume
# group. It can either be a size with its unit (eg. 20 GB), a percentage of
# free space or the 'max' keyword.
d-i partman-auto-lvm/guided_size string max

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# You can choose one of the predefined partitioning recipes:
# - atomic: all files in one partition
# - home: separate /home partition
# - multi: separate /home, /var, and /tmp partitions
# - server: separate /var and /srv partitions; swap limitted to 1G
# - small_disk: scheme dedicated to small harddrives (under 10GB)
d-i partman-auto/choose_recipe select atomic

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string \
# boot-root :: \
# 40 50 100 ext3 \
# $primary{ } $bootable{ } \
# method{ format } format{ } \
# use_filesystem{ } filesystem{ ext3 } \
# mountpoint{ /boot } \
# . \
# 500 10000 1000000000 ext3 \
# method{ format } format{ } \
# use_filesystem{ } filesystem{ ext3 } \
# mountpoint{ / } \
# . \
# 64 512 300% linux-swap \
# method{ swap } format{ } \
# .

# The full recipe format is documented in the file partman-auto-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository. This also documents how to specify settings such as file
# system labels, volume group names and which physical devices to include
# in a volume group.

## Partitioning for EFI
# If your system needs an EFI partition you could add something like
# this to the recipe above, as the first element in the recipe:
# 538 538 1075 free \
# $iflabel{ gpt } \
# $reusemethod{ } \
# method{ efi } \
# format{ } \
# . \
#
# The fragment above is for the amd64 architecture; the details may be
# different on other architectures. The 'partman-auto' package in the
# D-I source repository may have an example you can follow.

# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

# Force UEFI booting ('BIOS compatibility' will be lost). Default: false.
#d-i partman-efi/non_efi_system boolean true
# Ensure the partition table is GPT - this is required for EFI
#d-i partman-partitioning/choose_label select gpt
#d-i partman-partitioning/default_label string gpt

# When disk encryption is enabled, skip wiping the partitions beforehand.
#d-i partman-auto-crypto/erase_disks boolean false
# Nếu hệ thống vẫn có sức chứa trống, bạn có dịp chỉ phân vùng sức chứa đó.
# Sự chọn này chỉ hoạt động nếu « partman-auto/method » (bên dưới)
# chưa được lập.
#d-i partman-auto/init_automatically_partition select biggest_free

# Hoặc bạn có thể chỉ định một đĩa cần phân vùng.
# Nếu hệ thống chỉ có một đĩa thì trình cài đặt sẽ sử dụng theo mặc định,
# khác thì tên thiết bị phải được đưa ra theo một định dạng truyền thống
# mà khác với devfs (thì « /dev/hda » hoặc « /dev/sda »,
# không phải /dev/discs/disc0/disc).
# Ví dụ, để sử dụng đĩa cứng SCSI/SATA thứ nhất:
#d-i partman-auto/disk string /dev/sda
# Hơn nữa, bạn cần phải chỉ định phương pháp cần dùng.
# Những phương pháp sẵn sàng hiện thời là:
# • regular dùng các kiểu phân vùng thường dùng với kiến trúc
# • lvm dùng LVM để phân vùng đĩa
# • crypto dùng LVM bên trong một phân vùng mật mã
d-i partman-auto/method string lvm

# Nếu một của những đĩa cần tự động phân vùng vẫn chứa
# một cấu hình LVM cũ, người dùng thông thường nhận
# một cảnh báo. Cũng có thể bỏ cảnh báo này bằng cách chèn sẵn:
d-i partman-lvm/device_remove_lvm boolean true
# Cũng vậy với mảng RAID phần mềm đã có :
d-i partman-md/device_remove_md boolean true
# Lại cũng vậy với bước xác nhận ghi các phiên bản lvm.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# Bạn có thể chọn một của ba công thức phiên bản định sẵn:
# • atomic tất cả các tập tin trong cùng một phân vùng
# • home phân vùng /home riêng
# • multi phân vùng riêng cho mỗi thư mục /home, /usr, /var, /tmp
d-i partman-auto/choose_recipe select atomic

# Hoặc cung cấp một công thức riêng...
# Nếu có đường dẫn nào giới thiệu một tập tin công thức
# vào môi trường cài đặt Debian, bạn có thể chỉ tới nó.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# Không thì bạn có thể để một công thức hoàn toàn vào tập tin cấu hình sẵn,
# trên cùng một dòng (hợp lý). Mẫu này tạo một phiên bản /boot nhỏ,
# thích hợp với vùng nhớ trao đổi, và sử dụng sức chứa còn lại
# cho phân vùng gốc:
#d-i partman-auto/expert_recipe string \
# boot-root :: \
# 40 50 100 ext3 \
# $primary{ } $bootable{ } \
# method{ format } format{ } \
# use_filesystem{ } filesystem{ ext3 } \
# mountpoint{ /boot } \
# . \
# 500 10000 1000000000 ext3 \
# method{ format } format{ } \
# use_filesystem{ } filesystem{ ext3 } \
# mountpoint{ / } \
# . \
# 64 512 300% linux-swap \
# method{ swap } format{ } \
# .

# Định dạng công thức đầy đủ được diễn tả trong tập tin
# « partman-auto-recipe.txt » được bao gồm trong gói « debian-installer »
# hoặc sẵn sàng từ kho lưu mã nguồn trình cài đặt Debian (D-I).
# Tập tin này cũng giải thích cách ghi rõ thiết lập như nhãn hệ thống tập tin,
# tên nhóm khối tin và những thiết bị vật lý nào cần bao gồm trong
# một nhóm khối tin.

# Đoạn này làm cho trình partman tự động phân vùng
# mà không yêu cầu xác nhận, miễn là bạn đã báo nó nên làm gì,
# dùng một của những phương pháp nói trên.
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true
a month ago
User avatar None

Source string changed
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
# /dev/sda,sda
# and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm: use LVM to partition the disk
# - crypto: use LVM within an encrypted partition
d-i partman-auto/method string lvm

# You can define the amount of space that will be used for the LVM volume
# group. It can either be a size with its unit (eg. 20 GB), a percentage of
# free space or the 'max' keyword.
d-i partman-auto-lvm/guided_size string max

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home: separate /home partition
# - multi: separate /home, /usr, /var, and /tmp partitions
# - server: separate /var and /srv partitions; swap limitted to 1G
# - small_disk: scheme dedicated to small harddrives (under 10GB)
d-i partman-auto/choose_recipe select atomic

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string \
# boot-root :: \
# 40 50 100 ext3 \
# $primary{ } $bootable{ } \
# method{ format } format{ } \
# use_filesystem{ } filesystem{ ext3 } \
# mountpoint{ /boot } \
# . \
# 500 10000 1000000000 ext3 \
# method{ format } format{ } \
# use_filesystem{ } filesystem{ ext3 } \
# mountpoint{ / } \
# . \
# 64 512 300% linux-swap \
# method{ swap } format{ } \
# .

# The full recipe format is documented in the file partman-auto-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository. This also documents how to specify settings such as file
# system labels, volume group names and which physical devices to include
# in a volume group.

# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean tru# Partitioning for EFI
# If your system needs an EFI partition you could add something like
# this to the recipe above, as the first element in the recipe:
# 538 538 1075 free \
# $iflabel{ gpt } \
# $reusemethod{ } \
# method{ efi } \
# format{ } \
# . \
#
# The fragment above is for the amd64 architecture; the details may be
# different on other architectures. The 'partman-auto' package in the
# D-I source repository may have an example you can follow.

# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

# Force UEFI booting ('BIOS compatibility' will be lost). Default: false.
#d-i partman-efi/non_efi_system boolean true
# Ensure the partition table is GPT - this is required for EFI
#d-i partman-partitioning/choose_label select gpt
#d-i partman-partitioning/default_label string gpt

# When disk encryption is enabled, skip wiping the partitions beforehand.
#d-i partman-auto-crypto/erase_disks boolean false
a month ago
User avatar None

Resource updated
Parsing of the “po/vi/preseed.po” file was enforced. a month ago
User avatar None

Resource updated
Parsing of the “po/vi/preseed.po” file was enforced. 2 months ago
User avatar None

Resource updated
The “po/vi/preseed.po” file was changed. 3 months ago
Browse all translation changes