Klipper/Beaglebone @ Hosted Weblate

Language	Approved	Translated	Unfinished	Unfinished words	Unfinished characters	Untranslated	Checks	Suggestions	Comments
English GPL-3.0-or-later	100%	100%	0	0	0	0	2	0	0

Abkhazian GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Albanian GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Angika GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Arabic GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Bulgarian GPL-3.0-or-later	0%	6%	57	1,503	10,077	57	1	0	0

Catalan GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Chinese (Simplified Han script) GPL-3.0-or-later	0%	50%	30	977	6,692	30	1	0	0

Chinese (Traditional Han script) GPL-3.0-or-later	0%	16%	51	1,419	9,507	51	0	0	0

Chuukese GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Czech GPL-3.0-or-later	0%	1%	60	1,521	10,206	60	0	0	0

Danish GPL-3.0-or-later	0%	1%	60	1,521	10,206	60	0	0	0

Duala GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Dutch GPL-3.0-or-later	0%	1%	60	1,521	10,206	60	0	0	0

Esperanto GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

French GPL-3.0-or-later	0%	16%	51	1,419	9,507	51	0	5	0

German GPL-3.0-or-later	0%	13%	53	1,480	9,942	53	0	0	0

Greek GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Hungarian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Italian GPL-3.0-or-later	0%	16%	51	1,419	9,507	51	0	0	0

Japanese GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Korean GPL-3.0-or-later	0%	13%	53	1,480	9,942	53	0	0	0

Lithuanian GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Norwegian Bokmål GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Polish GPL-3.0-or-later	0%	3%	59	1,506	10,121	59	0	0	0

Portuguese GPL-3.0-or-later	0%	1%	60	1,521	10,206	60	0	0	0

Portuguese (Brazil) GPL-3.0-or-later	0%	16%	51	1,419	9,507	51	0	0	0

Romanian GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Russian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Slovak GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Slovenian GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Spanish GPL-3.0-or-later	0%	8%	56	1,492	10,026	56	0	0	0

Tamil GPL-3.0-or-later	0%	100%	0	0	0	0	8	0	0

Thai GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Turkish GPL-3.0-or-later	0%	3%	59	1,506	10,121	59	0	0	0

Turkish (Ottoman) GPL-3.0-or-later	0%	0%	61	1,522	10,216	61	0	0	0

Ukrainian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Vietnamese GPL-3.0-or-later	0%	0%	61	1,522	10,216	60	0	0	0

Please sign in to see the alerts.

Overview

Project website	www.klipper3d.org
Instructions for translators	The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well. For code blocks without comment, please flag them as `ignore-same`, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag. The Gettext and markdown files in docs/locales are specific for languages. Check contributing for current guidelines. To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers	kingu dingyifei KevinOConnor Neko-vecter
Translation license	GNU General Public License v3.0 or later
Translation process	Translations can be made directly. Translation suggestions can be made. Translations are reviewed by dedicated reviewers. Any authenticated user can contribute. The translation uses bilingual files.
Source code repository	`https://github.com/Klipper3d/klipper-translations/`
Repository branch	translations
Last remote commit	Translations update from Hosted Weblate (#660) `be77c14a0` Weblate (bot) authored a month ago
Last commit in Weblate	locales: Translated using Weblate (Czech) `81c2f27f7` vyPal authored 3 days ago
Weblate repository	`https://hosted.weblate.org/git/klipper/readme/`
File mask	`docs/locales/*/LC_MESSAGES/Beaglebone.po`

4 days ago

String statistics

	Strings percent	Hosted strings	Words percent	Hosted words	Characters percent	Hosted characters
Total		2,318		57,836		388,208
Source		61		1,522		10,216
Approved	0%	0	0%	0	0%	0
Waiting for review	15%	348	12%	7,214	12%	48,331
Translated	17%	409	15%	8,736	15%	58,547
Needs editing	1%	1	1%	1	1%	10
Read-only	2%	61	2%	1,522	2%	10,216
Failing checks	1%	12	1%	476	1%	3,537
Strings with suggestions	1%	5	1%	45	1%	263
Untranslated strings	82%	1,908	84%	49,099	84%	329,651

Last 12 months Previous

Activity in last 12 months


Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec	Jan	Feb	Mar

Quick numbers

57,836

Hosted words

2,318

Hosted strings

17%

Translated

Contributors

and previous 30 days

Trends of last 30 days

−7%

Hosted words

+100%

−24%

Hosted strings

+100%

−2%

Translated

+19%

—

Contributors

—

Search

Advanced query builder

Query examples

Review strings changed by other users	`changed:>="1 month ago" AND NOT changed_by:anonymous`	Add
Translated strings	`state:>=translated`	Add
Strings with comments	`has:comment`	Add
Strings with any failing checks	`has:check`	Add
Strings with suggestions from others	`has:suggestion AND NOT suggestion_author:anonymous`	Add
Approved strings with suggestions	`state:approved AND has:suggestion`	Add
All untranslated strings added the past month	`added:>="1 month ago" AND state:<=needs-editing`	Add
Strings changed in the past two weeks	`changed:>="2 weeks ago"`	Add
Translated strings in a certain language	`is:translated AND language: en`	Add

None Resource updated Klipper Beaglebone Turkish (Ottoman)	File “`docs/locales/ota/LC_MESSAGES/Beaglebone.po`” was added. 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English Related overlays, for [Hardware Pin designation](#hardware-pin-designation) CAN0: BB-CAN0-00A0.dtbo CAN1: BB-CAN1-00A0.dtbo UART0: - used for Console UART1(RX,TX): BB-UART1-00A0.dtbo UART1(RTS,CTS): BB-UART1-RTSCTS-00A0.dtbo UART2(RX,TX): BB-UART2-00A0.dtbo UART3(RX,TX): BB-UART3-00A0.dtbo UART4(RS-485): BB-UART4-RS485-00A0.dtbo UART5(RX,TX): BB-UART5-00A0.dtbo Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English BeagleBone have up to 6 hardware UART(Serial) buses (up to 3Mbit) and up to 2 hardware CAN(1Mbit) buses. UART1(RX,TX) and CAN1(TX,RX) and I2C2(SDA,SCL) are using same pins - so you need to chose what to use UART1(CTSN,RTSN) and CAN0(TX,RX) and I2C1(SDA,SCL) are using same pins - so you need to chose what to use All UART/CAN related pins are 3.3v based, so you will need to use Transceiver chips/boards like SN74LVC2G241DCUR (for UART), SN65HVD230 (for CAN), TTL-RS485 (for RS-485) or something similar which can convert 3.3v signals to appropriate levels. Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English Enabling hardware UART(Serial)/CAN Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English BeagleBone usually have multiple hardware I2C buses, for example BeagleBone Black can have 3 of them, they support speed up-to 400Kbit Fast mode. By default, in BeagleBone Black there are two of them (i2c-1 and i2c-2) usually both are already configured and present on P9, third ic2-0 usually reserved for internal use. If you are using CRAMPS board then i2c-2 is present on P303 port with 3.3v level, If you want to obtain I2c-1 in CRAMPS board - you can get them on Extruder1.Step, Extruder1.Dir pins, they also are 3.3v based, check CRAMPS board Schematics for pin references. Related overlays, for [Hardware Pin designation](#hardware-pin-designation): I2C1(100Kbit): BB-I2C1-00A0.dtbo I2C1(400Kbit): BB-I2C1-FAST-00A0.dtbo I2C2(100Kbit): BB-I2C2-00A0.dtbo I2C2(400Kbit): BB-I2C2-FAST-00A0.dtbo Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English Enabling hardware I2C Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English Take a note that BeagleBone usually is 3.3v based hardware and to use 5V SPI devices you need to add Level-Shifting chip, for example SN74CBTD3861, SN74LVC1G34 or similar. If you are using CRAMPS board - it already contains Level-Shifting chip and SPI1 pins will become available on P503 port, and they can accept 5v hardware, check CRAMPS board Schematics for pin references. Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English Save changes in /boot/uEnv.txt and reboot the board. Now you have SPI1 Enabled, to verify its presence execute command Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English next uncomment variable and define it this way Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago
None String added in the repository Klipper Beaglebone Turkish (Ottoman)	English uncomment variable Turkish (Ottoman) 0 characters edited Current translation Empty 4 days ago

Browse all component changes

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the last translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.