Klipper/Config_checks @ Hosted Weblate

Language	Approved	Translated	Unfinished	Unfinished words	Unfinished characters	Untranslated	Checks	Suggestions	Comments
English GPL-3.0-or-later	100%	100%	0	0	0	0	3	0	0

Abkhazian GPL-3.0-or-later	0%	0%	32	1,242	7,690	32	0	0	0

Albanian GPL-3.0-or-later	0%	31%	22	1,047	6,583	22	0	0	0

Angika GPL-3.0-or-later	0%	0%	32	1,242	7,690	32	0	0	0

Arabic GPL-3.0-or-later	0%	0%	32	1,242	7,690	32	0	0	0

Bulgarian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Catalan GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Chinese (Simplified Han script) GPL-3.0-or-later	43%		0	0	0	0	0	1	0

Chinese (Traditional Han script) GPL-3.0-or-later	0%	71%	9	589	3,698	9	0	0	0

Chuukese GPL-3.0-or-later	0%	0%	32	1,242	7,690	32	0	0	0

Czech GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Danish GPL-3.0-or-later	0%	40%	19	1,095	6,817	19	0	0	0

Duala GPL-3.0-or-later	0%	0%	32	1,242	7,690	31	0	0	0

Dutch GPL-3.0-or-later	0%	37%	20	1,057	6,572	17	0	0	0

Esperanto GPL-3.0-or-later	0%	37%	20	881	5,589	20	0	0	0

French GPL-3.0-or-later	0%		0	0	0	0	0	2	0

German GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Greek GPL-3.0-or-later	0%	0%	32	1,242	7,690	32	0	0	0

Hungarian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Italian GPL-3.0-or-later	0%	90%	3	197	1,275	3	1	0	0

Japanese GPL-3.0-or-later	0%	37%	20	1,108	6,915	18	0	0	0

Korean GPL-3.0-or-later	0%	71%	9	589	3,698	9	0	0	0

Lithuanian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Norwegian Bokmål GPL-3.0-or-later	0%	25%	24	1,142	7,051	24	0	0	0

Polish GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Portuguese GPL-3.0-or-later	0%		0	0	0	0	0	1	0

Portuguese (Brazil) GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Romanian GPL-3.0-or-later	0%	31%	22	1,047	6,583	22	0	0	0

Russian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Slovak GPL-3.0-or-later	0%	100%	0	0	0	0	1	0	0

Slovenian GPL-3.0-or-later	0%	3%	31	1,240	7,672	31	0	0	0

Spanish GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Tamil GPL-3.0-or-later	0%	100%	0	0	0	0	6	0	0

Thai GPL-3.0-or-later	0%	0%	32	1,242	7,690	29	1	0	0

Turkish GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Turkish (Ottoman) GPL-3.0-or-later	0%	0%	32	1,242	7,690	32	0	0	0

Ukrainian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Vietnamese GPL-3.0-or-later	0%	9%	29	1,135	7,061	29	2	0	0

Please sign in to see the alerts.

Overview

Project website	www.klipper3d.org
Instructions for translators	The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well. For code blocks without comment, please flag them as `ignore-same`, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag. The Gettext and markdown files in docs/locales are specific for languages. Check contributing for current guidelines. To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers	kingu dingyifei KevinOConnor Neko-vecter
Translation license	GNU General Public License v3.0 or later
Translation process	Translations can be made directly. Translation suggestions can be made. Translations are reviewed by dedicated reviewers. Any authenticated user can contribute. The translation uses bilingual files.
Source code repository	`https://github.com/Klipper3d/klipper-translations/`
Repository branch	translations
Last remote commit	Translations update from Hosted Weblate (#660) `be77c14a0` Weblate (bot) authored a month ago
Last commit in Weblate	locales: Translated using Weblate (Czech) `81c2f27f7` vyPal authored yesterday
Weblate repository	`https://hosted.weblate.org/git/klipper/readme/`
File mask	`docs/locales/*/LC_MESSAGES/Config_checks.po`

2 days ago

String statistics

	Strings percent	Hosted strings	Words percent	Hosted words	Characters percent	Hosted characters
Total		1,216		47,196		292,220
Source		32		1,242		7,690
Approved	1%	14	1%	205	1%	1,180
Waiting for review	56%	686	52%	24,686	52%	152,316
Translated	60%	732	55%	26,133	55%	161,186
Needs editing	1%	9	1%	303	1%	1,767
Read-only	2%	32	2%	1,242	2%	7,690
Failing checks	1%	14	1%	578	1%	3,651
Strings with suggestions	1%	4	1%	240	1%	1,472
Untranslated strings	39%	475	43%	20,760	44%	129,267

Last 12 months Previous

Activity in last 12 months


Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec	Jan	Feb	Mar

Quick numbers

47,196

Hosted words

1,216

Hosted strings

60%

Translated

105

Contributors

and previous 30 days

Trends of last 30 days

+5%

Hosted words

+100%

+5%

Hosted strings

+100%

−3%

Translated

+63%

−100%

Contributors

+100%

Search

Advanced query builder

Query examples

Review strings changed by other users	`changed:>="1 month ago" AND NOT changed_by:anonymous`	Add
Translated strings	`state:>=translated`	Add
Strings with comments	`has:comment`	Add
Strings with any failing checks	`has:check`	Add
Strings with suggestions from others	`has:suggestion AND NOT suggestion_author:anonymous`	Add
Approved strings with suggestions	`state:approved AND has:suggestion`	Add
All untranslated strings added the past month	`added:>="1 month ago" AND state:<=needs-editing`	Add
Strings changed in the past two weeks	`changed:>="2 weeks ago"`	Add
Translated strings in a certain language	`is:translated AND language: en`	Add

None Resource updated Klipper Config_checks Turkish (Ottoman)	File “`docs/locales/ota/LC_MESSAGES/Config_checks.po`” was added. 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English To calibrate the extruder, navigate to the command console and run the PID_CALIBRATE command. For example: `PID_CALIBRATE HEATER=extruder TARGET=170` Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English To test the extruder motor it will be necessary to heat the extruder to a printing temperature. Navigate to the temperature graph section and select a target temperature from the temperature drop-down box (or manually enter an appropriate temperature). Wait for the printer to reach the desired temperature. Then navigate to the command console and click the "Extrude" button. Verify that the extruder motor turns in the correct direction. If it does not, see the troubleshooting tips in the previous section to confirm the "enable_pin", "step_pin", and "dir_pin" settings for the extruder. Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English Use the STEPPER_BUZZ command to verify the connectivity of each stepper motor. Start by manually positioning the given axis to a midway point and then run `STEPPER_BUZZ STEPPER=stepper_x` in the command console. The STEPPER_BUZZ command will cause the given stepper to move one millimeter in a positive direction and then it will return to its starting position. (If the endstop is defined at position_endstop=0 then at the start of each movement the stepper will move away from the endstop.) It will perform this oscillation ten times. Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English If the endstop appears inverted (it reports "open" when triggered and vice-versa) then add a "!" to the pin definition (for example, "endstop_pin: ^PA2"), or remove the "!" if there is already one present. Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English Manually move all the printer axes so that none of them are in contact with an endstop. Send a QUERY_ENDSTOPS command via the command console. It should respond with the current state of all of the configured endstops and they should all report a state of "open". For each of the endstops, rerun the QUERY_ENDSTOPS command while manually triggering the endstop. The QUERY_ENDSTOPS command should report the endstop as "TRIGGERED". Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English Verify that all of the printer axes can manually move freely (the stepper motors are disabled). If not, issue an M84 command to disable the motors. If any of the axes still can not move freely, then verify the stepper "enable_pin" configuration for the given axis. On most commodity stepper motor drivers, the motor enable pin is "active low" and therefore the enable pin should have a "!" before the pin (for example, "enable_pin: !PA1"). Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English Navigate to the temperature graph section and type in 50 followed by enter in the extruder/tool temperature box. The extruder temperature in the graph should start to increase (within about 30 seconds or so). Then go to the extruder temperature drop-down box and select "Off". After several minutes the temperature should start to return to its initial room temperature value. If the temperature does not increase then verify the "heater_pin" setting in the config. Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English Navigate to the command console and issue an M112 command in the terminal box. This command requests Klipper to go into a "shutdown" state. It will cause an error to show, which can be cleared with a FIRMWARE_RESTART command in the command console. Octoprint will also require a reconnect. Then navigate to the temperature graph section and verify that temperatures continue to update and the temperatures are not increasing. If temperatures are increasing, remove power from the printer. Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago
None String added in the repository Klipper Config_checks Turkish (Ottoman)	English Start by verifying that temperatures are being properly reported. Navigate to the temperature graph section in the user interface. Verify that the temperature of the nozzle and bed (if applicable) are present and not increasing. If it is increasing, remove power from the printer. If the temperatures are not accurate, review the "sensor_type" and "sensor_pin" settings for the nozzle and/or bed. Turkish (Ottoman) 0 characters edited Current translation Empty 2 days ago

Browse all component changes

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the last translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.