Klipper/Pressure_Advance @ Hosted Weblate

Language	Approved	Translated	Unfinished	Unfinished words	Unfinished characters	Untranslated	Checks	Suggestions	Comments
English GPL-3.0-or-later	100%	100%	0	0	0	0	3	0	0

Abkhazian GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Albanian GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Angika GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Arabic GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Bulgarian GPL-3.0-or-later	0%	100%	0	0	0	0	2	0	0

Catalan GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Chinese (Simplified Han script) GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Chinese (Traditional Han script) GPL-3.0-or-later	7%	100%	0	0	0	0	2	0	0

Chuukese GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Czech GPL-3.0-or-later	0%	10%	25	990	6,322	25	0	0	0

Danish GPL-3.0-or-later	0%	3%	27	1,033	6,641	27	0	0	0

Duala GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Dutch GPL-3.0-or-later	0%	3%	27	1,033	6,641	27	0	0	0

Esperanto GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

French GPL-3.0-or-later	0%	100%	0	0	0	0	2	0	0

German GPL-3.0-or-later	0%	25%	21	981	6,213	21	1	1	0

Greek GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Hungarian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Italian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Japanese GPL-3.0-or-later	0%	3%	27	1,033	6,641	27	1	0	0

Korean GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Lithuanian GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Norwegian Bokmål GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Polish GPL-3.0-or-later	0%	17%	23	916	5,872	23	0	0	0

Portuguese GPL-3.0-or-later	0%	3%	27	1,033	6,641	27	0	0	0

Portuguese (Brazil) GPL-3.0-or-later	0%	7%	26	993	6,345	26	0	0	0

Romanian GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Russian GPL-3.0-or-later	0%	96%	1	1	27	0	1	0	0

Slovak GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Slovenian GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Spanish GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Tamil GPL-3.0-or-later	0%	96%	1	2	16	1	6	0	0

Thai GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Turkish GPL-3.0-or-later	0%	10%	25	990	6,322	25	0	0	0

Turkish (Ottoman) GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Ukrainian GPL-3.0-or-later	0%		0	0	0	0	0	0	0

Vietnamese GPL-3.0-or-later	0%	0%	28	1,035	6,657	28	0	0	0

Please sign in to see the alerts.

Overview

Project website	www.klipper3d.org
Instructions for translators	The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well. For code blocks without comment, please flag them as `ignore-same`, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag. The Gettext and markdown files in docs/locales are specific for languages. Check contributing for current guidelines. To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers	kingu dingyifei KevinOConnor Neko-vecter
Translation license	GNU General Public License v3.0 or later
Translation process	Translations can be made directly. Translation suggestions can be made. Translations are reviewed by dedicated reviewers. Any authenticated user can contribute. The translation uses bilingual files.
Source code repository	`https://github.com/Klipper3d/klipper-translations/`
Repository branch	translations
Last remote commit	Translations update from Hosted Weblate (#660) `be77c14a0` Weblate (bot) authored a month ago
Last commit in Weblate	locales: Translated using Weblate (Czech) `81c2f27f7` vyPal authored 7 hours ago
Weblate repository	`https://hosted.weblate.org/git/klipper/readme/`
File mask	`docs/locales/*/LC_MESSAGES/Pressure_Advance.po`

yesterday

String statistics

	Strings percent	Hosted strings	Words percent	Hosted words	Characters percent	Hosted characters
Total		1,064		39,330		252,966
Source		28		1,035		6,657
Approved	1%	2	1%	2	1%	64
Waiting for review	30%	328	29%	11,693	29%	75,395
Translated	33%	358	32%	12,730	32%	82,116
Needs editing	1%	1	1%	1	1%	27
Read-only	2%	28	2%	1,035	2%	6,657
Failing checks	1%	18	1%	133	1%	1,330
Strings with suggestions	1%	1	1%	34	1%	223
Untranslated strings	66%	705	67%	26,599	67%	170,823

Last 12 months Previous

Activity in last 12 months


Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec	Jan	Feb	Mar

Quick numbers

39,330

Hosted words

1,064

Hosted strings

33%

Translated

Contributors

and previous 30 days

Trends of last 30 days

+4%

Hosted words

+100%

−4%

Hosted strings

+100%

−1%

Translated

+35%

—

Contributors

+100%

Search

Advanced query builder

Query examples

Review strings changed by other users	`changed:>="1 month ago" AND NOT changed_by:anonymous`	Add
Translated strings	`state:>=translated`	Add
Strings with comments	`has:comment`	Add
Strings with any failing checks	`has:check`	Add
Strings with suggestions from others	`has:suggestion AND NOT suggestion_author:anonymous`	Add
Approved strings with suggestions	`state:approved AND has:suggestion`	Add
All untranslated strings added the past month	`added:>="1 month ago" AND state:<=needs-editing`	Add
Strings changed in the past two weeks	`changed:>="2 weeks ago"`	Add
Translated strings in a certain language	`is:translated AND language: en`	Add

None Resource updated Klipper Pressure_Advance Turkish (Ottoman)	File “`docs/locales/ota/LC_MESSAGES/Pressure_Advance.po`” was added. yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English Pressure advance Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English The pressure advance system does not change the timing or path of the toolhead. A print with pressure advance enabled will take the same amount of time as a print without pressure advance. Pressure advance also does not change the total amount of filament extruded during a print. Pressure advance results in extra extruder movement during move acceleration and deceleration. A very high pressure advance setting will result in a very large amount of extruder movement during acceleration and deceleration, and no configuration setting places a limit on the amount of that movement. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English Once pressure advance is tuned in Klipper, it may still be useful to configure a small retract value in the slicer (eg, 0.75mm) and to utilize the slicer's "wipe on retract option" if available. These slicer settings may help counteract ooze caused by filament cohesion (filament pulled out of the nozzle due to the stickiness of the plastic). It is recommended to disable the slicer's "z-lift on retract" option. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English If a high pressure advance value (eg, over 0.200) is used then one may find that the extruder skips when returning to the printer's normal acceleration. The pressure advance system accounts for pressure by pushing in extra filament during acceleration and retracting that filament during deceleration. With a high acceleration and high pressure advance the extruder may not have enough torque to push the required filament. If this occurs, either use a lower acceleration value or disable pressure advance. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English It is common for the test print to show different behavior on each corner. Often the slicer will arrange to change layers at one corner which can result in that corner being significantly different from the remaining three corners. If this occurs, then ignore that corner and tune pressure advance using the other three corners. It is also common for the remaining corners to vary slightly. (This can occur due to small differences in how the printer's frame reacts to cornering in certain directions.) Try to choose a value that works well for all the remaining corners. If in doubt, prefer a lower pressure advance value. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English The test print is designed to run with a high extruder flow rate, but otherwise "normal" slicer settings. A high flow rate is obtained by using a high printing speed (eg, 100mm/s) and a coarse layer height (typically around 75% of the nozzle diameter). Other slicer settings should be similar to their defaults (eg, perimeters of 2 or 3 lines, normal retraction amount). It can be useful to set the external perimeter speed to be the same speed as the rest of the print, but it is not a requirement. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English Printing temperature and extrusion rates can impact pressure advance. Be sure to tune the [extruder rotation_distance](Rotation_Distance.md#calibrating-rotation_distance-on-extruders) and [nozzle temperature](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide#Nozzle_Temperature) prior to tuning pressure advance. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English The pressure advance value is dependent on the extruder, the nozzle, and the filament. It is common for filament from different manufactures or with different pigments to require significantly different pressure advance values. Therefore, one should calibrate pressure advance on each printer and with each spool of filament. Turkish (Ottoman) 0 characters edited Current translation Empty yesterday
None String added in the repository Klipper Pressure_Advance Turkish (Ottoman)	English Important Notes Turkish (Ottoman) 0 characters edited Current translation Empty yesterday

Browse all component changes

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the last translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.